Click to go to FLEX-i-LINK Home Page
Home Schematics Specifications Reviews & References Contact Us Sitemap




Photo 1 of 5 of FLEX-i-LINK's woven metal tennis nets   Photo 2 of 5 of FLEX-i-LINK's woven metal tennis nets   Photo 3 of 5 of FLEX-i-LINK's woven metal tennis nets   Photo 4 of 5 of FLEX-i-LINK's woven metal tennis nets   Photo 5 of 5 of FLEX-i-LINK's woven metal tennis nets

Click on the FLEX-i-LINK metal net photo thumbnails above for a larger view.

FLEX-I-LINK Woven Metal Net Specifications

Net 11 gauge woven 1 1/2" mesh aluminum-coated steel net, 41'6" long, .35 oz. per sq. ft. Aluminum coating per A.S.T.M specification A-491. Tensile strength 80,000 P.S.I.
Aluminum coating should last 10 times longer than conventional hot-dipped galvanized coating. Smooth aluminum coating has no sharp burrs and will not crack or peel as galvanized will.
Cover Heavy-duty 22 ozz. per yd. water vinyl-shielded nylon cover complete with center tie-down. Secured by brass plated grommets with matching aluminum fasteners, this cover is highly resistant to puncture, abrasion, rot, mildew and ultra violet ray.
Unlike snap-type covers, this net cover cannot be easily removed by unauthorized personnel. Additional stitching along top of cover retards wear, steel cover cable never comes in direct contact with top of cover. This net cover won't fade, retains its original whiteness after long and hard use, and outlasts canvas 5 to 1.
Attendant Key Specially machined to fit brass nuts
Only the attendant key can be used to adjust and remove nets. Prevents tampering, theft and vandalism.
Cover Cable 3/16" diameter zinc-coated, aircraft cable made with 7 strands of 19 wires each. Minimum of 4200 lb. breaking strength
Offers the same true ball deflection as cord nets, and maintains proper width of cover.
Net Cable 3/16" diameter zinc-coated, aircraft cable made with 7 strands of 19 wires each. Cable is factory attached to the net, and has a minimum of 4200 lb. breaking strength
Cable supports net only.
Tension Bars Two 3/16" x 3/4" hot dipped galvanized, factory attached to each end of the net
Holds net close to posts. Distributes tension of net evenly.
Eye Bolts Four 3/8" diameter, zinc coated.
Adjusts 1/4" net cable and also 3/16" cover cable to proper heights and widths.
J Bolts Six 3/8" diameter, zinc coated.
Adjusts proper tension on woven metal net.
Brass Nuts Ten 3/8" diameter, specially machined to fit attendant key.
Will not rust, remain adjustable for the lift of the net.

FLEX-I-LINK Post Specifications

Permanent Type Galvanized 4" o.d. steel posts, 9.1 lbs. per foot. Each post is 7' long, complete with post caps. Weight is 130 lbs. per pair.
Heavy duty posts are a good investment - will not bend and lose alignment like undersized posts. They prevent sagging, and should never need replacing.
Removable Type Galvanized 4" o.d. steel posts, 9.1 lbs. per foot, complete with post caps, 14-gauge ground sleeves are complete with removable ground sleeve covers to seal sleeves when posts are removed. Weight is 140 lbs. per pair./b>
Designed especially for multi-purpose courts, these net posts can be removed in minutes to utilize the courts for other activities such as basketball, badminton, dances, hockey, etc.

FLEX-I-LINK reserves the right to change product specification at any time without incurring obligations.


Site Design by Siner Graphics